How to create the perfect hi-hats and cymbals
Publish Time: 2020-12-25 Origin: MusicRadar
How to create the perfect hi-hats and cymbals
The hi-hats are a pair of cymbals mounted on a stand, one upside down and the other the right way up, both held in place on a central spike and connected to a footpedal at the base of the stand.
By operating the pedal, the drummer brings the hi-hats together. If you watch a jazz drummer play, you’ll see that the hi-hats spend most of the time closed, but open and shut quickly on the second and fourth beats of the bar. In just about all other modern styles the hi-hats are kept closed or half-closed and played with sticks, anchoring the drum track by beating out eighth-notes.
The role of the hats is to give life to the kick and snare pattern. Acoustic hats vary from small, thin and bright (jazz, pop, dance) to big, thick and dark (rock), and only really have four sounds: closed, half-closed, open and pedalled. Of course, each of these has endless tonal variations, as a browse through any good drum sample library will illustrate.
A good drummer or programmer will use accents (where certain hits are louder than the others) to bring what might otherwise be a boring hi-hat pattern to life, but as well as the volume, a skilled player or programmer will play around with the timing.
Moving or playing the hi-hat part slightly ahead of or behind the beat will subtly change the feel of the groove, making it feel more urgent or laid back. In dance music, the kick is almost always quantised exactly to the grid, but moving other elements around can create a much groovier feel. A bit of swing will slightly delay every other beat in a pattern of 16ths, creating a ‘shuffle’ feel. The quantise functions in your DAW will have loads of variations of swing for you to experiment with.
Crash and ride
The two other essential cymbals are the crash and the ride. There are others, like China-types and splashes, but they’re just smaller and ‘trashier’ variations on the crash, respectively.
The ride cymbal sounds with a clear ‘ping’ followed by a wash of airy overtones. It’s generally used as an alternative to the hi-hats, changing the feel of the drum track for the chorus or middle eight. There are many flavours: light and thin for jazz, dark and heavy for rock – some jazz drummers even use ride cymbals fitted with loose rivets or fine chains for exaggerated sizzle and ‘air’. Crashes are there to mark occasional accents in the song (the ends of significant phrases, mostly), and it’s really just a question of choosing one that you like from the endless samples available.
Artificial energy
It’s tempting to add energy to a section of your mix by ramping up the cymbals, and a powering crash or sizzling half-open hat certainly does sound exciting. A good test of the dynamics of your music, though, is to turn the cymbals off. Is it still dynamic? Does the music itself have energy? If the only thing adding change or excitement is the cymbals, you have a mix that will become boring very quickly. Cymbals should be there to enhance and articulate the musical energy, not be the source of it. Some great pop tracks even contain no cymbals at all – Hey Ya! by Outkast springs to mind.
To achieve cymbal perfection, you need to set your cymbals at the right level in the mix and not add too much high-frequency EQ. Controlling levels is easy with samples but far less simple when recording a live drummer, as cymbal spill can dominate. A wall of guitars or constant ride soon becomes like white noise, so pick your moments.